Ice Auger

Brrr, it's cold outside - hey, let's go fishing!
Forum rules
Forum Post Guidelines: This Forum is rated “Family Friendly”. Civil discussions are encouraged and welcomed. Name calling, negative, harassing, or threatening comments will be removed and may result in suspension or IP Ban without notice. Please refer to the Terms of Service and Forum Guidelines post for more information. Thank you
Post Reply
User avatar
Kfedka
Commander
Posts: 397
Joined: Mon Jan 07, 2008 2:37 pm
Location: Eastern, WA

Ice Auger

Post by Kfedka » Thu Oct 22, 2009 6:14 am

I'm looking into buying a new ice auger; http://www.cabelas.com/cabelas/en/templ ... ISO-8859-1

Except I'll get mine from Ebay which is little cheaper. Any tips on which size to get. Ice fishing for trout, panfish, etc.

User avatar
Big D
Moderator
Moderator
Posts: 1464
Joined: Wed Nov 05, 2008 8:20 pm
Location: Waterville

RE:Ice Auger

Post by Big D » Thu Oct 22, 2009 6:52 am

I have an 8" which does great but I find myself using my friends 6" because it gets through the ice faster with less work.
Bragging may not bring happiness, but no man having caught a large fish goes home through an alley.
Fair Winds & Following Seas.
Big D

User avatar
YellowBear
Captain
Posts: 629
Joined: Wed May 02, 2007 9:44 am
Location: Potholes

RE:Ice Auger

Post by YellowBear » Thu Oct 22, 2009 7:53 am

Make sure you buy a new one and not a used one.
I have seen to many guys try and knock the bottom of the hole out with the auger.
This will dull and bend the blades. Nothing worse than an auger that dosent cut.
I have a six inch.
YellowBear
Life member N.A.F.C.
Angling Masters international
Good luck and be safe

User avatar
Kfedka
Commander
Posts: 397
Joined: Mon Jan 07, 2008 2:37 pm
Location: Eastern, WA

RE:Ice Auger

Post by Kfedka » Thu Oct 22, 2009 1:11 pm

Yes, I'm getting a new one. Any tips on how to sharpen them, I seen these sharpeners on ebay and other stores are they any good; http://cgi.ebay.com/ACCUSHARP-AUGER-SHA ... 3ef21da91e ?

User avatar
Big D
Moderator
Moderator
Posts: 1464
Joined: Wed Nov 05, 2008 8:20 pm
Location: Waterville

RE:Ice Auger

Post by Big D » Thu Oct 22, 2009 2:22 pm

[quote="Kfedka"]Yes, I'm getting a new one. Any tips on how to sharpen them, I seen these sharpeners on ebay and other stores are they any good]

I wouldn't waste my money or time on trying to sharpen the blades. I have a friend that fought with his auger every time we went out last year and the auger always won. He used a stone and tried to sharpen (Clean Up) his auger blades and could never get the auger to cut right again. I felt sorry for him and purchased new blades for him just prior to our last time hitting the ice last year and he thanks me every time we talk. I think I paid eight or ten dollars for the new blades. I've been using the same blades that came with my auger three years ago without ever trying to sharpen them and they still cut like new. Just make sure that you always cover the blades with the protective cover that comes with the auger after each use and I'm sure you'll get at least a few good years out of the blades. I do have an extra set of blades just in case. Nothing ruins a trip out on the ice quicker than having a non-functioning auger.
Bragging may not bring happiness, but no man having caught a large fish goes home through an alley.
Fair Winds & Following Seas.
Big D

User avatar
fishaholictaz
Admiral
Posts: 1654
Joined: Wed Mar 19, 2008 2:30 pm
Location: Laramie Wy.

RE:Ice Auger

Post by fishaholictaz » Thu Oct 22, 2009 3:13 pm

I have a little Eskimo hand auger and I love it... Mine is an eight inch and I some times wish I had a power 10"... I would go with an eight if you are hunting bigger trout the extra room is nice#-o I talked to a friend who ice fishes all the time and he said that auger blades are sharpened with burrs that help cot the ice and a stone is the worst thing to do to blades. He gets three seasons per set of blades and all he does is take care of them and keep them covered....
A fisherman= A JERK ON ONE END OF A FISHING POLE WAITING FOR A JERK ON THE OTHER!!
Hello, my name is Tim and I am addicted to fishing!
Coming to you from Wyoming!!!
Photo bucket

User avatar
panfisher
Captain
Posts: 843
Joined: Mon May 07, 2007 6:50 am
Location: Yakima, WA

RE:Ice Auger

Post by panfisher » Wed Oct 28, 2009 8:14 pm

i've used 6" and 8" augers. i found that i prefer the 8". never would have pulled some of the bigger trout through the 6" that i caught last winter. plus i find that i can get more action out of my offerings from finicky panfish by slowly moveing from one side of the( 8")hole to the other. than i would from a 6".

User avatar
Stanach
Angler
Posts: 1
Joined: Fri Nov 16, 2018 12:39 am
Location: North Berhen,NJ

Re: Ice Auger

Post by Stanach » Fri Nov 16, 2018 1:03 am

Sorry to bring this thread back around...just my two cents...

it all depends on how many holes you need., not the tork but the battery.... if you have an x marks the spot it would be enough for a couple holes. but keep the handle in truck at least.

to be honest you could prabably get away with out an auger at all, most guys I have found have always been generous enough to say here try mine.

it might be alright for a 4 inch auger. but man I cant pull a 12 inch crappie up a 4 inch hole. those holes are perfect for perch or 8 inch gills, any thing else its a bust, I am uncomfortable with a 6 inch hole, I will settle for an 8 inch hole but much rather have an 11-12 inch hole...

If you have a strike master hand lazer auger it might work, but take the handle just in case. you can throw the drill and adapter and a couple tools in the bucket to run an experiment. You have to have a good auger to begin with.

User avatar
harleypiker
Warrant Officer
Posts: 100
Joined: Tue Oct 04, 2011 2:55 am

Re: Ice Auger Hayden Ice?

Post by harleypiker » Sun Feb 10, 2019 1:59 pm

Anyone know if there is safe ice (3 inches) on the north end of Hayden Lake?
There was only one inch of ice for 30 feet out from shore and 3 inches thereafter on Killarney last Thursday. Very touchy. Zero pike

Post Reply